Motorcycle Tips & Techniques

Motorcycle Safety/Dynamics

Skip Repetitive Navigational Links
Safety TipsTips:171-204   Tip180   Print article Print

Weight and Traction Management

By: James R. Davis


I recently gave a safety presentation to a group of BMW riders in Houston, Texas. During that presentation I spent a great deal of time talking about weight and traction management. For those of you who can view a Windows Movie file here is a relatively short clip from that presentation (10 minutes long, 36 megabytes of download - but it streams):
Weight and Traction Management Clip


During that presentation I made some strong assertions about the consequences of aerodynamic drag. I said, for example, that at 75 MPH, depending upon how large your frontal surface area is, your bike could have a weight transfer of about 100 pounds from the front tire to the rear due entirely to wind resistance (it's called a 'downforce'.) I also stated that you could have a total lift of about 50 pounds caused by pressure differentials. Very late in the presentation I even stated that riding with your jacket unzipped could cost you about 1 HP of power and as much as 8 pounds of weight off your front tire. Well, you can imagine that there were some disbelievers in the crowd.

So, I wrote an Excel model to demonstrate these assertions. That model can be accessed and run by clicking on the link below. (Assuming, of course, that you have Microsoft Excel on your system.)

Drag and Lift Model

Here is an example of the model's output:


This is a very complicated piece of code. Not surprising since there are lots of concepts that need to be included which are not straightforward.

There are two kinds of drag: friction and pressure. Friction drag is essentially insignificant compared to pressure drag at motorcycle speeds so all I have calculated with this model is pressure drag.

Calculating the pressure drag force is a fluid dynamics problem. Air is treated as a liquid. The computation involves a standard algorithm (used even by the Wright brothers):

Drag force = (d * V^2 * Cx * S) / 2

Where:
d = air density
V = velocity
Cx = Drag coefficient
S = Frontal surface area

The first thing you should notice from this is that the drag force increases with the square of your speed. (By the way, in my calculations V is the speed of the wind hitting you from directly in front of you. So, if you are riding at 65 MPH and there is a head wind of 10 MPH, V is set at 75.)

The drag coefficient is a dimensionless number that represents, essentially, the form of the object that is being hit by the wind. A parachute would have a Cx on the order of 1.5, a ball would be more like .45, a wing would be on the order of .1 or .2, and a teardrop has a Cx of .05. Sportbikes have Cx values between .3 and .6, touring bikes have values between .4 and .9, and cars tend to have values of between .26 and .36.

The surface area presented to the wind is extremely important in this analysis. If you have a windscreen on your bike that adds a meaningful amount of area but please note that it is only the area of the windscreen that is OUTSIDE of the profile of the bike and rider that is added to the total.

Air density is a very difficult number to come up with because it is a function of altitude, temperature, and moisture content. Air density is highest at sea level and decreases with altitude. It increases as temperature goes down. Standard air pressure assumes sea level at 59 degrees F. Moisture decreases density (odd as that sounds.) I wrote the model assuming normal dry air.

Once the drag force is calculated all you need to do is multiply it by the velocity again and you get the amount of power involved (Power = Force * Velocity) – in other words, I wanted to see how much Horsepower was being consumed fighting wind drag.

Another thing you can do with force is determine the moment amount. That is, if you multiply the force by the length of a lever arm you can determine how hard that force is put to use. In our analysis I multiplied the drag force by the height of the Center of Wind Resistance (where the surface area above that height is exactly the same as the surface area below it) in order to calculate the downforce caused by the wind drag. Downforce acts as a torque. That is, all forward pointing forces are at the contact patch and wind drag is through the Center of Wind Resistance so that, like weight transfer caused by acceleration, we know how much weight is added to the rear tire (and removed from the front one.)

Pressure drag is vectored in line with the direction of the wind. Vectored at 90 degrees to the direction of the wind is another force called Lift. Lift is most difficult to calculate since it depends on a lift-coefficient very similar to the drag-coefficient used to calculate drag. The lift coefficient is a dimensionless number that reflects such things as the aerodynamic shapes involved, surface texture, and the relative height of obstructions compared to the length of the body following that obstruction. A windscreen, for example, creates a significant lift just aft of itself while the farther back you go the less lift is created. Every part of the surface area, from rider’s helmet to rear running lights, creates both drag and lift. The method used by this author to closely estimate the lift-coefficient was to use the drag-coefficient and multiply it by the height of the Center of Wind Resistance then divide by the length of the wheelbase. This number, in essence, indicates the efficiency of drag forces in the creation of lift.

As the drag coefficient already reflects the 'form' of the bike I chose to use it as the lift coefficient as well. Since lift could be larger or smaller than drag (for an airplane wing it is obviously much higher, for a bike - since it stays on the ground for all reasonable speeds - it would be lower. As a reasonable approximation of lift force I used the drag force divided by the ratio of height of the Center of Wind Resistance and the wheelbase. I found an equation in Mr. Gaetano Cocco's book, Motorcycle Design and Technology, that totally supports that approximation. He states that Lift for a motorcycle is the downforce divided by the wheelbase. That, as it turns out, is exactly what my calculation says.

The lift formula I used was:

Lift force = Drag force * H / Wheelbase

Where H is height of the Center of Wind Resistance.

Now, application of the downforce merely shifts weight from the front tire to the rear tire. If nothing else were going on the total weight of the motorcycle and rider would be unaffected. But there is a lift force in addition to the downforce. The question is: how should that lift be apportioned between the front and the rear tires? As an arbitrary choice I elected to use the location of the Center of Gravity along the wheelbase in the same way I used it to determine weight distribution of a stationary bike. Thus, for example, in a typical bike that has 55% of its weight on the rear tire, I allocated 55% of the lift to the rear tire as well.

The weight on the front tire is found as follows:

Front tire weight = Static weight on front tire - Downforce - Front tire lift

And the weight on the rear tire is found as follows:

Rear tire weight = Static weight on rear tire + Downforce - Rear tire lift.

Though having nothing to do with aerodynamics, acceleration/deceleration causes weight transfer which directly affects the weight on each tire. If you note that the bottom yellow input field is a way for you to optionally input acceleration rate in order to see the cumulative effect of both aerodynamics and acceleration of weight. Acceleration does not affect total weight as does aerodynamic lift, but it does affect the distribution of weight on your front and rear tires.


Copyright © 1992 - 2021 by The Master Strategy Group, all rights reserved.
http://www.msgroup.org

(James R. Davis is a recognized expert witness in the fields of Motorcycle Safety/Dynamics.)

     
Visitors
58,073,046
A plea for your help
Views
137,073,099